Upgrading vCenter Server to 8.0 U2 fails with precheck error „Source vSphere ESX Agent Manager (EAM) upgrade failed to obtain EAM URLs to check against trusted certificates by the System“
I just stated updating the customer VMware VCSA ( VMware vCenter Server Appliance) from version 7.0.3 build 19480866 to version 8.0.2 23504390. Stage 2 pre-check fails with error message: Error: …
A high-severity issue has occurred at the Power-On Self-Test (POST) phase which has resulted in the system BIOS to abruptly stop functioning.
A high-severity issue has occurred at the Power-On Self-Test (POST) phase which has resulted in the system BIOS to abruptly stop functioning. I just updated the DELL R750 to …
Cannot start VM with vGPU – insufficient amount of graphic resources
Cannot start VM with vGPU – insufficient amount of graphic resources One of my customers uses vGPU with VMware Horizon infrastructure. We configured a desktop pool with 32 VMs with …
DELL PowerStore – WebUI (UI) unavailable after node reboots or power cycle of an appliance
DELL PowerStore – WebUI (UI) unavailable after node reboots or power cycle of an appliance is few months ago, when i prepared the two identical DELL PowerStore storage arrays, now …
Upgrading to vCenter Server 7.0 to 8.0.2 fails with difference FQDN and PNID
Upgrading to vCenter Server 7.0 to 8.0.2 fails with difference FQDN and PNID while upgrading the VCSA 7.0.3 to the latest VCSA 8.0.3 the prechecks fail with the following message …
Upgrading VMware vCenter (VCSA) 7.0.3 to 8.0.2 fails with Regenerate certificates for SSO and try again.
Upgrading VMware vCenter (VCSA) 7.0.3 to 8.0.2 fails with Regenerate certificates for SSO and try again. We just started a upgrade process of VCSA 7.0.3 to the lastest build of …
Veeam v12 – Install CDP I/O filter – Operation is not allowed in the current state
i just tried install a Veeam CDP I/O filter on my lab VMware ESXi 6.7.0, but i got an error message „The operation is not allowed in the current state.“
DELL ME5024 – GUI Management is Inaccessible
The DELL ME5024 (powervault) storage array GUI is inaccessible for both controllers. The administrator unable to login to serial CLI session and unable to open SSH session to both management interface. This issue is caused by out of memory and leads to the management application processes being terminated. If you have firmware lower than ME5.1.2.0.1 you may encounter this problem.
Wyse 5070 Windows 10 IoT and VMware Horizon 8 – SLL connection was shut down while reading
Wyse 5070 Windows 10 IoT and VMware Horizon 8 – SLL connection was shut down while reading When user is connected to the virtual desktop via VMware Horizon client, the …